The ratings of 17 Oil and Gas stocks are down this week, according to the Portfolio Grader database. Each of these rates a “D” (“sell”) or “F” overall (“strong sell”).
Phillips 66 (NYSE:) is on the decline this week, earning a D (“sell”) after receiving a C (“hold”) last week. Phillips 66 is an advantaged downstream energy company. It operates through the following businesses segments: Refining and Marketing, Midstream and Chemicals. The Refining and Marketing segment purchases, refines, markets and transports crude oil and petroleum products in the United States, Europe … In Portfolio Grader’s specific subcategories of Earnings Growth and Earnings Revisions, PSX also gets F’s. .
10 Best Net Payout Yield Stocks For 2015: CNH Industrial NV (CNHI)
CNH Industrial NV is a Netherlands-based company primarily engaged in the manufacture of heavy machinery and vehicles equipment. It divides its activities into four main businesses. The Agricultural Equipment offers agricultural equipment under the New Holland Agriculture, Case IH brands and the Steyr brand. The Construction Equipment produces excavators, bulldozers, backhoes, compactors and other construction equipment under the New Holland Construction and Case Construction Equipment brands. The Trucks & Commercial Vehicles manufactures trucks and a commercial vehicles, including buses, coaches and special vehicles under Iveco, Iveco Bus and Heuliez Bus brands, as well as it produces quarry and mining equipment through Iveco Astra, and fire fighting vehicles through the Iveco Magirus brand. The Powertrain offers transmission systems, engines for marine application and power generation through FPT Industrial brand. Advisors' Opinion:- [By Lisa Levin]
CNH Industrial NV (NYSE: CNHI) shares tumbled 2.47% to reach a new 52-week low of $11.44. CNH Industrial reported an 11% drop in its third-quarter profit.
- [By GuruFocus]
According to GuruFocus list of 52-week lows, these Guru stocks have reached their 52-week lows.Deutsche Bank AG (DB) Reached the 52-Week Low of $36.04The prices of Deutsche Bank AG (DB) shares have declined to close to the 52-week low of $36.04, which is 36.1% off the 52-week high of $54.49. Deutsche Bank AG is owned by 3 Gurus we are tracking. Among them, 2 have added to their positions during the past quarter. 1 reduced their position.Deutsche Bank Aktiengesellschaft is a stock corporation organized under the laws of Germany. Deutsche Bank Ag has a market cap of $36.74 billion; its shares were traded at around $36.04 with a P/E ratio of 413.90 and P/S ratio of 0.90. The dividend yield of Deutsche Bank Ag stocks is 2.10%.David Dreman (Trades, Portfolio) owns 58,725 shares as of 03/31/2014, an increase of 404.64% from the previous quarter. This position accounts for 0.2% of the $1.29 billion portfolio of Dreman Value Management. Mario Gabelli (Trades, Portfolio) owns 6,250 shares as of 03/31/2014, which accounts for 0.0015% of the $18.53 billion portfolio of GAMCO Investors.Ross Stores Inc (ROST) Reached the 52-Week Low of $67.16The prices of Ross Stores Inc (ROST) shares have declined to close to the 52-week low of $67.16, which is 21.2% off the 52-week high of $81.99. Ross Stores Inc is owned by 14 Gurus we are tracking. Among them, 7 have added to their positions during the past quarter. 5 reduced their positions.Ross Stores, Inc., is a Delaware Corporation. It turned public with its IPO in August 1985. Ross Stores Inc has a market cap of $14.21 billion; its shares were traded at around $67.16 with a P/E ratio of 17.00 and P/S ratio of 1.39. The dividend yield of Ross Stores Inc stocks is 1.10%. Ross Stores Inc had an annual average earnings growth of 23.20% over the past 10 years. GuruFocus rated Ross Stores Inc the business predictability rank of 4.5-star.ROST recently reported earnings per share for the 13 weeks ended May 3, 2014 of $1.15, up from $1.07 fo
Top Machinery Stocks To Own For 2014: IDEX Corp (IEX)
IDEX Corporation (IDEX), incorporated on September 24, 1987, is an applied solutions business that sells an array of pumps, flow meters and other fluidics systems and components and engineered products to customers in a variety of markets worldwide. All of the Company�� business activities are carried out through wholly owned subsidiaries. IDEX operates in three business segments: Fluid & Metering Technologies, Health & Science Technologies and Fire & Safety/Diversified Products. Reporting units in the Fluid & Metering Technologies segment consist of Banjo; Energy and Fuels (Energy); Chemical, Food & Process (CFP) and Water & Waste Water (Water). Reporting units in the Health & Science Technologies segment consist of IDEX Health & Science (IH&S); IDEX Optics and Photonics (IOP); Precision Polymer Engineering (PPE); Gast; Micropump and Materials Process Technologies (MPT). Reporting units in the Fire & Safety/Diversified Products segment consist of Fire Suppression; Rescue Tools and Band-It. In July 20, 2012, it acquired Matcon Group Limited. In March 2013, it announced the acquisition of FTL Seals Technology, Ltd. On April 11, 2012, the Company acquired the stock of PPC. On April 30, 2012, the Company acquired the stock of ERC.
Fluid & Metering Technologies Segment
The Fluid & Metering Technologies Segment designs, produces and distributes displacement pumps, flow meters, injectors, and other fluid-handling pump modules and systems and provides flow monitoring and other services for the water and wastewater industries. Fluid & Metering Technologies pump and metering solutions serve a range of end markets, including industrial infrastructure (fossil fuels, refined and alternative fuels, and water and wastewater), chemical processing, agricultural, food and beverage, pulp and paper, transportation, plastics and resins, electronics and electrical, construction and mining, pharmaceutical and bio-pharmaceutical, machinery and other markets. Fluid & Metering Technologies accounte! d for 43% of IDEX�� sales and 82% of IDEX�� operating income, with approximately 46% of its sales to customers outside the United States as of December 31, 2012, with approximately 46% of its sales to customers outside the United States. Banjo is a provider of pumps, valves, fittings and systems used in liquid handling. Banjo is based in Crawfordsville, Indiana and its products are used in agricultural and industrial applications. Approximately 11% of Banjo�� sales during 2012 were to customers outside the United States.
Energy consists of the Company�� Corken, Faure Herman, Liquid Controls, S.A.M.P.I. and Toptech businesses. Energy is a supplier of flow meters, electronic registration and control products, rotary vane and turbine pumps, reciprocating piston compressors, and terminal automation control systems. Energy has facilities in Longwood, Florida and Zwijndrech, Belgium (Toptech products), Oklahoma City, Oklahoma (Corken products), La Ferte Bernard, France (Faure Herman products), Vadodara, Gujarat, India (Liquid Controls products), and Altopascio, Italy (S.A.M.P.I. products). Applications for Liquid Controls and S.A.M.P.I. positive displacement flow meters, electronic, registration and control products include mobile and stationary metering installations for wholesale and retail distribution of petroleum and liquefied petroleum gas, aviation refueling, and industrial metering and dispensing of liquids and gases. Corken products consist of rotary vane pumps, single and multistage regenerative turbine pumps, and small horsepower reciprocating piston compressors. Toptech supplies terminal automation hardware and software to control and manage inventories, as well as transactional data and invoicing, to customers in the oil, gas and refined-fuels markets. Faure Herman is a supplier of ultrasonic and helical turbine flow meters used in the custody transfer and control of fluids and gases. Approximately 53% of Energy�� sales during 2012 were to customers outside the United State! s.
!
CFP consists of the Company�� Richter, Viking and Warren Rupp businesses. CFP is a producer of air-operated and motor-driven double-diaphragm pumps and replacement parts, lined pumps, valves and control equipment for the chemical, fine chemical and pharmaceutical industries, and external gear pumps. Richter�� corrosion resistant fluoroplastic lined products offer solutions for applications in the process industry. Viking�� products consist of external gear pumps, strainers and reducers, and related controls used for transferring and metering thin and viscous liquids sold under the Viking and Wright Flow brands and air-operated double-diaphragm pumps sold under the Blagdon brand. Markets served by Viking products include chemical, petroleum, pulp and paper, plastics, paints, inks, tanker trucks, compressor, construction, food and beverage, personal care, pharmaceutical and biotech. Warren Rupp products (which also include Pumper Parts and Versa-Matic products) are used for abrasive and semisolid materials, as well as for applications where product degradation is a concern or where electricity is not available or should not be used. Markets served by Warren Rupp products include chemical, paint, food processing, electronics, construction, utilities, mining and industrial maintenance. CFP maintains operations in Kampen, Germany (Richter products), Cedar Falls, Iowa (Richter and Viking products), Eastbourne, East Sussex, England, Shannon, Ireland (Viking products) and Mansfield, Ohio (Warren Rupp products). CFP primarily uses independent distributors to market and sell its products. Approximately 54% of CFP�� sales during 2012 were to customers outside the United States.
Water consists of the Company�� ADS, IETG, iPEK, Knight and Pulsafeeder businesses. Water is a provider of metering technology and flow monitoring products and underground surveillance services for water and wastewater markets, as well as a manufacturer of pumps and dispensing equipment for industrial laundries! , commerc! ial dishwashing and chemical metering, and a provider of metering pumps, special-purpose rotary pumps, peristaltic pumps, fully integrated pump and metering systems, custom chemical-feed systems, electronic controls and dispensing equipment. ADS�� products and services provide integrated solutions that enable industry, municipalities and government agencies to analyze and measure the capacity, quality and integrity of wastewater collection systems, including the maintenance and construction of such systems. IETG�� products and services enable water companies to manage their water distribution and sewerage networks, while its surveillance service specializes in underground asset detection and mapping for utilities and other private companies. iPEK supplies remote controlled systems used for infrastructure inspection. Knight is a manufacturer of pumps and dispensing equipment for industrial laundries, commercial dishwashing and chemical metering. Pulsafeeder products are used to introduce precise amounts of fluids into processes to manage water quality and chemical composition, as well as peristaltic pumps. Its markets include water and wastewater treatment, oil and gas, power generation, pulp and paper, chemical and hydrocarbon processing, and swimming pools. Water maintains operations in Huntsville, Alabama and various other locations in the United States, Sydney, New South Wales, Australia and Melbourne, Victoria, Australia (ADS products), Leeds, England (IETG products and services), Hirschegg, Austria, and Sulzberg, Germany (iPEK products), Lake Forest, California, Mississauga, Ontario, Canada, Eastbourne, East Sussex, England, Unanderra, Australia, and Ciudad Juarez, Chihuahua, Mexico (Knight products), Rochester, New York, Punta Gorda, Florida and Milan, Italy (Pulsafeeder products). Approximately 47% of Water�� sales during 2012 were to customers outside the United States.
Water Services & Technology (WST) consists of the Company�� ADS, IETG and iPEK businesses. WST is a provi! der of me! tering technology and flow monitoring products and underground surveillance services for wastewater markets. ADS�� products and services provide integrated solutions that enable industry, municipalities and government agencies to analyze and measure the capacity, quality and integrity of wastewater collection systems, including the maintenance and construction of such systems. IETG�� products and services enable water companies to manage their water distribution and sewerage networks, while its surveillance service specializes in underground asset detection and mapping for utilities and other private companies. iPEK supplies remote controlled systems used for infrastructure inspection. WST maintains operations in Huntsville, Alabama and various other locations in the United States and Australia (ADS products and services); Leeds, England (IETG products and services); and Hirschegg, Austria, and Sulzberg, Germany (iPEK products). Approximately 40% of WST�� 2012 sales were to customers outside the United States.
The Company competes with Pump Solutions Group, Dover Corporation, Milton Roy and Tuthill Corporation.
Health & Science Technologies Segment
The Health & Science Technologies Segment designs, produces and distributes a range of precision fluidics, rotary lobe pumps, centrifugal and positive displacement pumps, roll compaction and drying systems used in beverage, food processing, pharmaceutical and cosmetics, pneumatic components and sealing solutions, including pumping solutions required in analytical instrumentation, clinical diagnostics and drug discovery, molded and extruded, biocompatible medical devices and implantables, air compressors used in medical, dental and industrial applications, optical components and coatings for applications in the fields of scientific research, defense, aerospace, telecommunications and electronics manufacturing, laboratory and commercial equipment used in the production of micro and nano scale materials, precision pho! tonic sol! utions used in life sciences, research and defense markets, and precision gear and peristaltic pump technologies. The segment accounted for 35% of IDEX�� sales and 35% of operating income in 2012, with approximately 54% of its sales to customers outside the United States.
IH&S consists of Eastern Plastics, Rheodyne, Ismatec, Sapphire Engineering, Upchurch Scientific and ERC, which was acquired in April 2012. IH&S has facilities in Rohnert Park, California (Rheodyne products); Bristol, Connecticut (Eastern Plastics products); Wertheim-Mondfeld, Germany (Ismatec products); Middleboro, Massachusetts (Sapphire Engineering products); Oak Harbor, Washington (Ismatec and Upchurch Scientific products); and Kawaguchi, Japan (ERC products). Eastern Plastics products, which consist of high- precision integrated fluidics and associated engineered plastics solutions, are used in a set of end markets including medical diagnostics, analytical instrumentation, and laboratory automation. Rheodyne products consist of injectors, valves, fittings and accessories for the analytical instrumentation market. Rheodyne products are used by manufacturers of high pressure liquid chromatography equipment servicing the pharmaceutical, biotech, life science, food & beverage, and chemical markets. Ismatec products include peristaltic metering pumps, analytical process controllers, and sample preparation systems. Sapphire Engineering and Upchurch Scientific products consist of fluidic components and systems for the analytical, biotech and diagnostic instrumentation markets, such as fittings, precision-dispensing pumps and valves, tubing and integrated tubing assemblies, filter sensors and other micro-fluidic and nano-fluidic components, as well as advanced column hardware and accessories for the high performance liquid chromatography (HPLC) market. Sapphire Engineering and Upchurch Scientific products primarily serve the pharmaceutical, drug discovery, chemical, biochemical processing, genomics/proteomics research, envir! onmental ! labs, food/agriculture, medical lab, personal care, and plastics/polymer/rubber production markets. ERC manufactures gas liquid separations and detection solutions for the life science, analytical instrumentation and clinical chemistry markets. ERC�� products consist of in-line membrane vacuum degassing solutions, refractive index detectors and ozone generation systems. Approximately 52% of IH&S�� 2012 sales were to customers outside the United States.
IOP consists of CVI Melles Griot (CVI MG), Semrock and AT Films (the Precision Photonics portion of the AT Films business was acquired in April 2012). CVI MG is a into design and manufacture of precision photonic solutions used in the life sciences, research, semiconductor, security and defense markets. CVI MG�� products are focused on the generation, control and productive use of light for a variety of key science and industrial applications. Products consist of specialty lasers and light sources, electro-optical components, specialty shutters, opto-mechanical assemblies and components. In addition, CVI MG produces critical components for life science research, electronics manufacturing, military and other industrial applications including lenses, mirrors, filters and polarizers. These components are utilized in a number of applications such as spectroscopy, cytometry (cell counting), guidance systems for target designation, remote sensing, menology and optical lithography.
CVI MG is headquartered in Albuquerque, New Mexico, with additional manufacturing sites located in Carlsbad, California; Rochester, New York; Isle of Man, British Isles; Leicester, England; Kyongki-Do, Korea; Tokyo, Japan; Didam, The Netherlands; and Singapore. Semrock is a provider of optical filters for biotech and analytical instrumentation in the life sciences markets. Semrock�� optical filters are produced using state-of-the-art manufacturing processes which enable it to offer its customers improvements in instrument performance and reliability.! Semrock ! is located in Rochester, New York. AT Films specializes in optical components and coatings for applications in the fields of scientific research, defense, aerospace, telecommunications and electronics manufacturing. The Precision Photonics portion of its business specializes in optical components and coatings for applications in the fields of scientific research, aerospace, telecommunications and electronics manufacturing. AT Films is headquartered in Boulder, Colorado. Approximately 57% of IOP�� 2012 sales were to customers outside the United Sates.
Containment consists of Precision Polymer Engineering (PPE). PPE, which is located in Blackburn, England, is a provider of high performance seals and advanced sealing solutions for a diverse range of global industries and applications, including hazardous duty, analytical instrumentation, semiconductor/solar, process technologies, pharmaceutical, electronics, and food applications. Approximately 79% of PPE�� 2012 sales were to customers outside the United States.
Gast consists of the Company�� Gast and Jun-Air businesses. The Gast business is a manufacturer of air-moving products, including air motors, low-range and medium-range vacuum pumps, vacuum generators, regenerative blowers and fractional horsepower compressors. Gast products are used in a variety of long-life applications requiring a quiet, clean source of moderate vacuum or pressure. Gast products primarily serve the medical equipment, environmental equipment, computers and electronics, printing machinery, paint mixing machinery, packaging machinery, graphic arts, and industrial manufacturing markets. The Jun-Air business is a provider of low-decibel, ultra-quiet vacuum compressors suitable for medical, dental and laboratory applications. Based in Benton Harbor, Michigan, Gast also has a logistics and commercial center in Redditch, England. Approximately 27% of Gast�� 2012 sales were to customers outside the United States.
Micropump, headquartered i! n Vancouv! er, Washington, produces, precision-engineered, magnetically and electromagnetically driven rotary gear, piston and centrifugal pumps. Micropump products are used in low-flow abrasive and corrosive applications. Micropump products primarily serve the printing machinery, medical equipment, paints and inks, chemical processing, pharmaceutical, refining, laboratory, electronics, pulp and paper, water treatment, textiles, peristaltic metering pumps, analytical process controllers and sample preparation systems markets. Approximately 77% of Micropump�� 2012 sales were to customers outside the United States.
MPT consists of Quadro, Fitzpatrick, Microfluidics and Matcon Group Limited (Matcon), which was acquired in July 2012. Quadro is a provider of particle control solutions for the pharmaceutical and bio-pharmaceutical markets. Based in Waterloo, Ontario, Canada, Quadro�� activities include fine milling, emulsification and special handling of liquid and solid particulates for laboratory, pilot phase and production scale processing within the pharmaceutical and bio-pharmaceutical markets. Fitzpatrick is into the design and manufacture of process technologies for the pharmaceutical, food and personal care markets. Fitzpatrick designs and manufactures customized size reduction, roll compaction and drying systems to support their customers��product development and manufacturing processes. Fitzpatrick is headquartered in Elmhurst, Illinois. Microfluidics is into designing and manufacturing of laboratory and commercial equipment used in the production of micro and nano scale materials for the pharmaceutical and chemical markets. Microfluidics is the producer of the Microfluidizer family of high shear fluid processors for uniform particle size reduction, robust cell disruption and nanoparticle creation. Microfluidics has offices in Newton, Massachusetts. Matcon is into material processing solutions for high value powders used in the manufacture of pharmaceuticals, food, plastics, and fine chemic! als.
!Matcon�� products consist of the original cone valve powder discharge system and filling, mixing and packaging systems, all of which support its customers��automation and process requirements. Matcon is located in Evesham, Worcestershire, England. Approximately 61% of MPT�� 2012 sales were to customers outside the United States.
The Company competes with Gardner Denver, Inc., Thermo Scientific Dionex, Gooch & Housego PLC, Parker Hannifin and Valco Instruments Co., Inc.
Fire & Safety/Diversified Products Segment
The Fire & Safety/Diversified Products segment produces firefighting pumps and controls, rescue tools, lifting bags and other components and systems for the fire and rescue industry, engineered stainless steel banding and clamping devices used in a variety of industrial and commercial applications, and precision equipment for dispensing, metering and mixing colorants and paints used in a variety of retail and commercial businesses around the world. The segment accounted for 22% of IDEX�� sales and 53% of IDEX�� operating income in 2012, with approximately 56% of its sales to customers outside the United States.
Fire Suppression consists of the Company�� Class I, Hale and Godiva businesses, which produce truck-mounted and portable fire pumps, stainless steel valves, foam and compressed air foam systems, pump modules and pump kits, electronic controls and information systems, conventional and networked electrical systems, and mechanical components for the fire, rescue and specialty vehicle markets. Fire Suppression�� customers are primarily OEMs. Fire Suppression is headquartered in Ocala, Florida (Class 1 and Hale products), with additional facilities located in Warwick, England (Godiva products). Approximately 41% of Fire Suppression�� 2012 sales were to customers outside the United States.
Rescue consists of the Company�� Dinglee, Hurst Jaws of Life, Lukas and Vetter businesses, which produce hydraulic! , battery! , gas and electric-operated rescue equipment, hydraulic re-railing equipment, hydraulic tools for industrial applications, recycling cutters, pneumatic lifting and sealing bags for vehicle and aircraft rescue, environmental protection and disaster control, and shoring equipment for vehicular or structural collapse. Rescue Tool�� customers are primarily public and private fire and rescue organizations. Rescue has facilities in Shelby, North Carolina (Hurst Jaws of Life products); Tianjin, China (Dinglee products); Erlangen, Germany (Lukas products); and Zulpich, Germany (Vetter products). Approximately 75% of Rescue�� 2012 sales were to customers outside the United States.
Band-It is a producer of stainless steel banding, buckles and clamping systems. Band-It products are used for securing exhaust system heat and sound shields, industrial hose fittings, traffic signs and signals, electrical cable shielding, identification and bundling, and in numerous other industrial and commercial applications. Band-It products primarily serve the automotive, transportation equipment, oil and gas, general industrial maintenance, electronics, electrical, communications, aerospace, utility, municipal and subsea marine markets. Band-It is based in Denver, Colorado, with additional operations in Staveley, Derbyshire, England, and a IDEX shared manufacturing facility in China. Approximately 39% of Band-It�� 2012 sales were to customers outside the United States.
Dispensing Equipment produces precision equipment for dispensing, metering and mixing colorants and paints used in a variety of retail and commercial businesses worldwide. Dispensing Equipment is a global supplier of precision-designed tinting, mixing, dispensing and measuring equipment for auto refinishing and architectural paints. Dispensing Equipment products are used in retail and commercial stores, hardware stores, home centers, department stores, automotive body shops as well as point-of-purchase dispensers. Dispensing Equipmen! t is head! quartered in Wheeling, Illinois with additional facilities in Sassenheim, The Netherlands; Unanderra, Australia; and Milan, Italy, as well as IDEX shared manufacturing facilities in India and China. Approximately 59% of Dispensing Equipment�� 2012 sales were to customers outside the United States.
The Company competes with American Cast Iron Pipe Company, Holmatro, Inc., Nordic Capital and Panduit Corporation.
Advisors' Opinion:- [By Ben Levisohn]
Xylem’s big day has also boosted other water-infrastructure stocks. Flowserve (FLS) has gained 1.2% to $70.59, Idex Corp. (IEX) has risen 0.5% to $68.69 and Thermo Fisher Scientific (TMO) has advanced 0.4% t0 $98.22.
- [By Marc Bastow]
This week’s biggest increase came from applied solutions provider Idex (IEX), which �raised its quarterly dividend 22% to 23 cents per share payable April 30 to shareholders of record April 16.
IEX Dividend Yield: 1.60% - [By Rich Duprey]
Diversified technology machinist�IDEX (NYSE: IEX ) announced yesterday its second-quarter dividend of $0.23�per share, the same rate it paid last quarter after raising the payout 15% from $0.20 per share.
Top Machinery Stocks To Own For 2014: Toro Co (TTC)
The Toro Company (Toro), incorporated on November 7, 1983, designs, manufactures, and markets professional turf maintenance equipment and services, turf irrigation systems, agricultural micro-irrigation systems, landscaping equipment and lighting, and residential yard and snow removal products. The Company operates in three business segments: Professional, Residential, and Distribution. Its products are advertised and sold at the retail level under the names of Toro, Exmark, Irritrol, Hayter, Pope, Lawn-Boy and Lawn Genie. In October 2013, the Company acquired Xiamen Xiangfeng Water Saving Equipment Co., Ltd.
Professional
The Company designs professional turf, landscape, and agricultural products and markets them worldwide through a network of distributors and dealers, as well as directly to Government customers, rental companies, and retailers. These channel partners then sell its products to professional users engaged in creating and renovating landscapes, irrigating turf and agricultural fields, and maintaining turf, such as golf courses, sports fields, municipal properties, and residential and commercial landscapes.
Landscape Contractor Market
The Company market products to landscape contractors under the Toro and Exmark brands. Products for the landscape contractor market include zero-turn radius riding mowers, heavy-duty walk behind mowers, mid-size walk behind mowers, stand-on mowers, and turf renovation and tree care equipment. It also offers some products with electronic fuel injection engine options. In fiscal 2013, it enhanced its line of Toro Z Master Commercial 3000 Series mowers, featuring its TURBO FORCE cutting deck, integrated pump, and wheel motors designed for professional results, performance, and dependability. In addition, in fiscal 2013, it introduced the new Exmark Vantage X-Series stand-on mower.
Sports Fields and Grounds Market
Products for the sports fields and grounds market include riding rotar! y mowers and attachments, aerators, and debris management products, which include versatile debris vacuums, blowers, and sweepers. Other products include multipurpose vehicles, such as the Toro Workman, that can be used for turf maintenance, towing, and industrial hauling. These products are sold through distributors, who then sell to owners and/or managers of sports fields, Governmental properties, and residential and commercial landscapes.
Golf Course Market
The Company�� products for the golf course market include large reel and rotary riding products for fairway, rough and trim cutting; riding and walking mowers for putting greens and specialty areas; greens rollers; turf sprayer equipment; utility vehicles; aeration equipment; and bunker maintenance equipment. In fiscal 2013, it introduced the Reelmaster 3550-D, which features a productive 82 inch cutting width, enhanced ground-following capability with turf-friendly tires, and three-wheel drive system designed for traction in hilly and wet conditions. In addition, in fiscal 2013, it began offering versions of its golf products which are compliant with Tier 4 diesel engine emission requirements. It also manufacture and market underground irrigation systems for the golf course market, including sprinkler heads, controllers, turf sensors, and electric, battery-operated, and hydraulic valves. Its 835S/855S Series golf sprinklers are equipped with a unique TruJectory feature that provides enhanced water distribution control. Its Turf Guard wireless soil monitoring systems are designed to measure soil moisture, salinity, and temperature through buried wireless sensors that communicate through an Internet server for processing and presentation to a user through the Web.
Residential/Commercial Irrigation and Lighting Market
Turf irrigation products marketed under the Toro and Irritrol brands include rotors; sprinkler bodies and nozzles; plastic and brass valves; drip tubing and subsurface irrigation; ! electric ! and hydraulic control devices; and wired and wireless rain, freeze, and climate sensors. These products are designed to be used in residential and commercial turf irrigation systems that are installed into new systems or used to replace or retrofit existing systems. Most of the product lines are designed for underground automatic irrigation. Electric and hydraulic controllers activate valves and sprinkler bodies and nozzles in a typical irrigation system. Its retail irrigation products are marketed under the Toro and Lawn Genie brand names. These products are designed for homeowner installation and include sprinkler heads, valves, timers, and drip irrigation systems. Its ECXTRA sprinkler timers can be used with a home computer and its Scheduling Advisor recommends the proper watering schedule based on the local weather, plant type, and sprinkler. It manufactures and market lighting products under the Unique Lighting Systems brand name.
Micro-Irrigation Market
Products for the micro-irrigation market include products that regulate the flow of water for drip irrigation, including Aqua-Traxx PBX drip tape, Aqua-Traxx PC (pressure-compensating) drip tape, Blue Stripe polyethylene tubing, BlueLine drip line, and NGE emitters, all used in agriculture, mining, and landscape applications. In addition to these products, it offers control devices and connection options. These products are sold primarily through dealers and distributors who then sell to end users for use primarily in vegetable fields, fruit and nut orchards, vineyards, landscapes, and mines. In fiscal 2013, it expanded its product offering of the Neptune thinwall dripline into the North America market, featuring a medium-durability dripline that enables growers to install a subsurface drip irrigation system designed to last for up to ten years and to allow growers of medium-length crops to adopt drip irrigation. In addition, in fiscal 2013, it introduced AquaFlow 3.2 Drip Irrigation Design Software, a new software packag! e used to! help design drip irrigation systems.
Rental and Construction Market
The Company offers over 35 attachments for our compact utility loaders, including trenchers, augers, vibratory plows, and backhoes. In fiscal 2013, it launched the STX-38 Stump Grinder featuring high maneuverability and hydraulic sweep control. Products for the rental market include compact utility loaders, walk-behind trenchers, stump grinders, and turf renovation products, many of which are also sold to landscape contractors. Its presence in the construction market is driven by an equipment line of vibratory plows, trenchers, and horizontal directional drills, all of which are used in the installation, repair, and replacement of underground utilities with minimal impact on surrounding landscapes or structures. In fiscal 2013, it introduced the Toro Pro Sneak Vibratory Plow that delivers consistent and powerful plowing in a compact, maneuverable package.
Residential
The Company markets its residential products to homeowners through a variety of distribution channels, including outdoor power equipment dealers, hardware retailers, home centers, mass retailers, and over the Internet. These products are sold mainly in North America, Europe, and Australia, with the exception of snow removal products that are sold primarily in North America and Europe.
Walk Power Mower Products
The Company manufactures and markets a number of walk power mower models under its Toro and Lawn-Boy brand names, as well as the Pope brand in Australia and the Hayter brand in the United Kingdom. Toro also offers a line of rear-roller walk power mowers, a design that provides a striped finish, for the United Kingdom market.
Riding Products
The Company manufactures and markets riding products under the Toro brand name worldwide and under the Hayter brand name in the United Kingdom. Riding products primarily consist of zero-turn radius mowers. Lawn and garden tra! ctor mode! ls are sold worldwide. In addition, its rear engine and direct-collect riding mowers are manufactured and sold in the European market. A number of models are available with a variety of engines, decks, transmissions, and accessories.
Home Solutions Products
Toro designs and markets home solutions products under the Toro and Pope brand names, including electric and battery-operated grass trimmers, electric blower-vacuums, electric blowers, and electric snow throwers. In Australia, the Company also designs and markets underground and hose-end retail irrigation products under the Pope brand name.
Gas Snow Removal Products
The Company manufactures and markets a range of gas-powered single-stage and two-stage snow thrower models. Single-stage snow throwers are walk behind units with lightweight two- and four-cycle gasoline engines. Its two-stage snow throwers are designed for large areas of deep, heavy snow and use four-cycle engines. The Company�� two-stage snow throwers include a line of models featuring the Power Max auger system and the Quick Stick chute control technology.
Advisors' Opinion:- [By Seth Jayson]
There's no foolproof way to know the future for Toro (NYSE: TTC ) or any other company. However, certain clues may help you see potential stumbles before they happen -- and before your stock craters as a result.
- [By Charles Sizemore]
Stuart Varney took it a step further, mentioning Toro Company (TTC), the maker of many of the snow blowers that have become a common sight across much of America this year. I agreed, adding that Toro is a major manufacturer of lawn and turf maintenance equipment — and because virtually every lawn, park and golf course in America has suffered damage this year, and Toro is well positioned to profit from the repairs.
- [By Ben Levisohn]
Shares of Deere have dropped 0.7% to $93.65 at 3:49 p.m. today, while Agco (AGCO) has dipped 0.1% to $55.12, Toro (TTC) has gained 1% to $65.17 and Caterpillar (CAT) has risen 1.2% to $106.27.
Top Machinery Stocks To Own For 2014: Robogroup TEK Ltd (ROBO)
RoboGroup T.E.K Ltd. is a global, diversified enterprise with proprietary technologies on the forefront of robotics, motion control and technology education. RoboGroup's activities are organized in two related business operations: Yaskawa Eshed Technology (YET) and Intelitek.
YET, a joint venture with Japan's Yaskawa Electric Corp., which provides industrial motion controls, particularly those based on its algorithms. Intelitek, which develops, manufactures and markets training products and e-learning systems. Intelitek�� broad educational product line covers subjects such as computer-aided design, computer-aided manufacturing, configurable network computing, robotics, machine vision, hydraulics, pneumatics, sensors, process control and data acquisition. Intelitek also designs and produces integrated and customized manufacturing workcells, ranging from small-scale flexible manufacturing systems to complete computer integrated manufacturing systems.
Advisors' Opinion:- [By John Udovich]
Spruce Point Capital Management, LLC has released a research report about small cap robotics stock iRobot Corporation (NASDAQ: IRBT) entitled ��bout to Short Circuit,��meaning investors should take a closer look at the report, the�stock�and the performance of�robotics peer Adept Technology Inc (NASDAQ: ADEP) and�the Robo-Stox Global Robotics & Automation ETF (NASDAQ: ROBO). I should mention that we used to have both Adept Technology and iRobot Corporation in our SmallCap Network Elite Opportunity (SCN EO) portfolio�because we see the�robotics subsector improving as companies aim to reduce overhead and improve efficiencies through machine to machine (M2M) automation.
